Product Code:	ECBT-T-SS-V3
Availability:	In stock

EC Tuner V3
Our most versatile EC Tuner yet.

Building on our previous models, this EC Tuner is heavier and has a lock ring design that allows the EC Tuner to be locked down if needed.

Weight: 5.4 oz
Length 1.975
OD 1.480″
ID thread size: 1 1/8-20 TPI

Versatility is where the EC Tuner V3 shines. It can be threaded directly on barrels 1.125″ or larger or can be adapter to any other barrel contour.
The adapters allow the EC Tuner V3 to be installed on rimfire rifles, air rifles, and centerfire rifles. It can be mounted forward facing like the V1 and V2 EC Tuners or
it can be mounted backwards over the barrel behind any muzzle device you wish to use… yes, even suppressors!

Forward facing adapters come in 1/2-28, 1/2-20, 5/8-24 and 1″-20 at the moment. We will add additional thread sizes in the future.
The rearward facing adapters come in 5/8-24 with more threads to come. They are barrel contour specific for best fit.

How to tune your rifle with EC Tuner V3

Start at 0
Shoot a three shot group and then move the tuner to setting 5, shoot another three shot group. Keep doing this until you see two consecutive small group. Set tuner between the two settings and lock it down.

Leave it at that setting unless groups opens up. Keep in mind, you don’t HAVE to tune your rifle with the tuner, you GET to tune it with a tuner. If rifle is shooting well, there is no need to adjust tuner. Only adjust tuner if you need to.

If you are shooting at different temperature than when rifle was tuned, as temperature goes up, so do the numbers on the tuner. For exaple, if you tuned rifle at 70 degrees at setting 20 and now it is 90 and rifle is not shooting well, try setting 25, 30, etc. Tuner will bring rifle back in tune.